Do You Break Bird Cage Wheels Frequently?

IMG_3851

Here’s to that wonderful moment when a cage wheel snaps off and you can see another is about to follow the one that just rolled away…

I don’t know who started the trend of putting cheap castor wheels on the bottom of indoor bird cages but I think it’s safe to say that I have called that person every expletive I know (and a few I made up) on more than one occasion. I’m pretty sure that I’m not alone in this. The wheels that come standard on the bottom of most bird cages drive me completely mental. They’re not designed to roll smoothly over the items parrots throw at your floor, they’re designed to catch on that stuff and break at the most inconvenient moment.

IMG_3849

What these wheels are designed to do….

Well I’m no handyman. Actually, I used to be mortally afraid of cordless drills. They jump off your workbench all by themselves and drill holes through your fingers when you least expect it. They’re almost as bad as power saws (they cut your head off). Ok, so I’m not exactly a girly-girl (I freaked out a first date when I pulled a pair of pliers out of my handbag and fixed my watch strap when it broke), but it was my parrots that pushed me into overcoming my fear of power tools. Fixing bird cage wheel issues has become an essential skill.

IMG_3854

One of my early ‘fixes’. Couldn’t find a wheel to fit, so I used a product called ‘Knead It’ to permanently hold in a replacement wheel.

The easiest way to fix a broken wheel would be to buy a replacement wheel. That’s not as easy as it sounds around here though. I found that the only wheels available locally had different threads or were designed for different thicknesses of tubing than what my cages were made out of. Buying a replacement just wasn’t possible and so I found myself coming up with some extraordinarily dodgy methods of fixing my cages.

IMG_4012

Don’t use it near your birds (smells and the fumes may be toxic) but when it is set the fumes are gone.

During my irrational “fear of all electric tools that have bits that move when you press a button” days, I discovered a type of clay that sets like metal. (A product called “Selley’s Knead It.”) So there was no need to conquer my fear of the welding gear that still sits in the corner of my shed. It meant that if I couldn’t match the screw-in part of a wheel to the cage, I could still use a wheel of the same size and just mix up some of the clay to attach it. I’d shove the clay into the cage tubing, stick the wheel in and wait until it dried. It looked terrible but worked well (until the next pellet or bit of parrot toy got caught in the replacement wheel and broke it all over again).

IMG_3894

This style of wheel tends to last longer – if you can just find a way to attach it!

So think about how long it takes a parrot to chuck a pellet or bit of bird toy in the path of a rolling wheel and you can work out how quickly I snapped and forced myself to overcome my fear of electrical tools. I went to the hardware store and bought a cordless drill. Ok, the sales assistant wasn’t impressed by my request for a fluorescent green one. I think he thought I was nuts?  Especially when I explained my theory that fluorescent green was less scary than orange, but not as girly as pink so it might still be a good one? As it happens I did get a good one (green and black) and I never looked back.

IMG_3856

It’s great when you can just screw wheels in like this!

I’ve since found several ways to fix cage wheel problems but the biggest trick I’ve found is that in this case bigger is definitely better. Larger wheels seem to be a lot harder to break and they tend to roll over the stuff parrots throw at the ground a lot more easily than some of the smaller castor wheels on the market. The problem with larger wheels is that they don’t just slot into the metal tubing that most cages are made out of.

IMG_3852

Some of the other ‘fixes’. The one on the right was actually a combination of replacing dodgy wheels and making the cage the same height as my other lorikeet’s cage to help stop the lorikeets from screaming at each other.

In an ideal world you can just attach the wheels by screwing them into the base of your cage’s stand. However some stands have thin legs and it’s necessary to build something to sit the whole cage on. This is where welding skills would be handy. I don’t have welding skills (yet) though. So my latest technique has been to put together a timber frame. Obviously timber isn’t the most waterproof option in the world but I figure it’s only a stand (so not something the birds are chewing on) and as powder coated cages are pretty much the best option that you can buy where I live… a timber frame lasts about the same amount of time that a cage will.

IMG_3858

One of my custom built aviaries – the stronger wheels cost extra.

There is something to be said for getting a custom built cage if you can. I can honestly say my custom built cages have lasted better than any of my other cages and that may well come down to my request they be made with better wheels.

IMG_3864

Timber frames are very simple to put together with angled brackets.  (Step One)

IMG_3872

The pieces literally just slot together (step 2). I tend to use pine.

IMG_3887

Once the frame is assembled, attach the wheels.

IMG_3901

There is no need to damage your powder coated surface by screwing through it. Angled brackets are very easy to bend around a leg (as you screw them to the frame, they bend, gripping the leg tightly).

IMG_3906

The finished stand. If you’re wondering what the brown stuff is in the bottom of my cages? It’s a type of chemical free cat litter. I normally line my cages with paper but not when they’re outside. Outside paper blows away in the wind – cat litter doesn’t. 

Stainless steel cages are notoriously hard to get here in Australia (hopefully that will change in time), so often it seems powder-coated cages are the best we can hope for. In the meantime, I’ve got my fluorescent green cordless drill to help me. Now all I have to do is work out how to stop my parrots from pulling on my ponytail if I happen to bend over near their cage’s wheels…

IMG_3866

The “I am looking at your ponytail and waiting to grab it again” pose.

What alterations have you made to cages to make them more user-friendly? Let us know in the comments below or come and join the conversation on our Facebook page.

Mel Vincent works as an animal rehabilitator out of Australia.

9 comments

Trudy

I’ve experienced wheel problems and love the solution of the timber frame. I want the strongest wheels possible. Any suggestions?

Trudy
Ally

Fantastic 🙂. Just what I was looking for as $124 to get replacement castors (6). How is the wood frame attached to the cage ? Is it just by the bent brackets?

Ally
Robert Godwin

Excellent solutions to a massive problem. Just spent time attempting to replace castors final solution to remove the existing axle and replace with a Bunnings 40mm caster. Pulling apart was not easy. The shaft was a different cheap plastic sleeve.

Robert Godwin
Bob Anderson

Here’s a link to a place that sells replacement casters for every production-made caster known to man (or woman). I had the same problem except it was for an office chair. http://www.ontimesupplies.com/chair-casters-and-chair-glides.html

Bob Anderson
Linda

Awesome! Brilliant! Came across this while searching for…… Yup replacement wheels for my bird cage! Love your sense of humour, thank you for the giggles. But now I need to go buy a drill!

Linda
Maria

Thank you so much for the great ideas. We managed to build new bases for our King’s aluminum cages. Our wheels were replaced many times and thanks to this website we now have stable wheels that will last for many years.

Maria
Nancy H

Great ideas. I’m going to try me a few.

Nancy H
Sunny Arnold

I thought I was the only won with I problems hear… The lovely man at the local store here in Mesa has helped me ALOT . Can I ask – how did you ‘bolt’ the wheels onto the cage?

Sunny Arnold
Laura Vicari

Living in Florida, I like to put my normally kept indoors bird on the patio. Not knowing that this wheel business was a “normal” problem, when the first wheel broke, after contacting the store who got no response from the manufacturer, King’s Cages, I contacted them directly. After several shipments of new wheels/new sleeves, and more new wheels and sleeves to balance out the cage (after one of the cross supports broke from the off-balance issue!), we seem to be ok. Apparently, the wheels are not meant to actually move the cage!

Laura Vicari

Leave a comment

All comments are moderated before being published